Main Features

• 5-key functional waterproof keypad.
• Backlit 40mm LCD display with 6 high contrast digits with icons for showing the active functions.
• Color and brightness of the backlighting, customizable from Setup.
• Easy to clean stainless steel IP68 case, resistant to harsh and corrosive environments.
• Dimensions: 243x145x78,4mm.
• Suitable for use on the table, column, or wall.
• A/D 24 bit, 4 channel converter, max. 200 conv./sec. autoselect, and up to 8 signal linearisation points.
• Up to 10.000e or multirange 3 x 3000e @ 0,3 µV/e in CE-M approved versions for legal for trade use.
• Up to 1.000.000 displayable divisions with internal resolution up to 3.000.000 points.
• Connection with up to 8 load cells with input resistance equal to 350 Ohm or up to 16 cells of 700 Ohm each.
• Digital calibration and Set-Up from the keypad or from PC through DINITOOLS.
• Power supply through the built-in rechargeable battery, with 40h operating time, and fitted with an external battery charger.

I/O Section

• RS232/C bidirectional port on RJ11 connector for quick connection (optional RS485) on screw terminal, configurable for PC, PLC, or additional remote display.
• RS232/C bidirectional port is configurable for connection to printer or labeler.

Functions

Main Key:

• Zeroing
• Automatic tare
• Presettable tare
• Printing in 1, 2, or 3 copies
• Data transmission to PC

Operating Modes:

• High-Resolution Weighing x 10
• Net/Gross or lb/kg conversion
• Accumulation
• Formula weighing
• +/- Checkweighing
• Percentage weighing
• Approved transmission of the weight to PC/PLC (with Alibi memory ALMEM option)
• Counting
• Hold

The “alibi memory” function is available in combination with the required operating mode and it is activated automatically when installing the relevant optional board.

Optional functions:

• PEAK, detection of weight peaks (code DFWPK)
• Newton to Kg converter (code DFWPK)
• Input-output (on request)

Access to the user menu is gained using the dedicated key* to adjust the weighing filter, date and time, setpoint, and tare weight, which the user can access by entering a programmable access password.

* These quick access keys to the menus can be blocked by configuring a dedicated password.