Main Features

• Weight indicator with ABS case, 25mm backlit LCD display with 6 high contrast digits and icons for showing the active functions. 5-key functional waterproof keypad.
• Easy to clean ABS IP54 case, resistant to harsh and corrosive environments.
• Suitable for use on the table, column, or wall.
• Fitted with fixing bracket with adjustable inclination.
• A/D 24 bit, 4 channel converter, max. 200 conv./sec. autoselect, and up to 8 signal linearization points.
• Up to 10.000e or multirange 3 x 3000e @ 0,3 µV/e in CE-M approved versions for legal for trade use.
• Up to 1.000.000 displayable divisions with internal resolution up to 3.000.000 points.
• Connection with up to 8 load cells with input resistance equal to 350 Ohm or up to 16 cells of 700 Ohm each.
• Digital calibration and Set-Up from the keypad or from PC through DINITOOLS.
• Power supply from 5 to 12Vdc.
• Power supply: 12V power unit included (if connected it excludes the battery supply) or 4 AA batteries (not included), operating time about 40 hours.

I/O Section

• RS232/C bidirectional port on RJ11 connector for quick connection on screw terminal, configurable for PC, PLC, or additional remote display.
• RS232/C bidirectional port is configurable for connection to printer or labeler.

Selectable Function Modes

The user can select the operating modes directly using the dedicated key*:

• High-resolution display x 10
• Precision weighing with temporary recalibration via a sample weight (for internal factory use)
• Net/Gross
• Lb to Kg converter
• Free conversion factor (for meter and liter counters etc.)
• Weight totalizer
• Formulizer
• +/- controller with quick target and threshold input
• Percentage weighing
• Piece counter
• Hold

The “alibi memory” function is available in combination with the required operating mode and it is activated automatically when installing the relevant optional board.

Optional functions:

• PEAK, detection of weight peaks (code DFWPK)
• Newton to Kg converter (code DFWPK)

Access to the user menu is gained using the dedicated key* to adjust the weighing filter, date and time, setpoint, and tare weight, which the user can access by entering a programmable access password.

* These quick access keys to the menus can be blocked by configuring a dedicated password.